AUTONET TV

Passing the Test (How to Prevent Emissions Test Failure)

Vehicle emission testing has become ubiquitous in North America and for a good reason.  Clean air quality is important for the environment and all of us.  Since vehicle emissions are among the main causes of air pollution, emission testing can alert you to problems in your vehicle than can be fixed so it won't needlessly pollute.

Emissions tests are looking for certain toxic gases internal combustion engines produce, such as nitrogen oxide, particulate matter, non-methane organic gases and formaldehyde.  Emissions control systems reduce these gases if they are working properly. 

The best way to minimize pollution is to keep those vehicle systems working properly, and periodic inspection and maintenance is the key.  So if you want to make sure your vehicle will pass an emissions test, it helps to know what might go wrong.

Let's start on the easy one.  Your gas cap could be loose, allowing vapors to escape into the atmosphere.  The most common solution is to replace it.  Or your air filter may be dirty.  A dirty air filter may push your hydrocarbons pass the acceptable level.

Now to the more complicated things.  The mixture of fuel and air in your engine may be tilted toward the "too much fuel" side.  That could cause problems for your vehicle's catalytic converter, a device that converts toxic gases from your exhaust into less toxic pollutants.

Your vehicle has a closed system that prevents fuel tank vapors from escaping into the air; it's called the EVAP system.  A technician can track down problems.

Vehicle engineers have gone to great lengths to minimize the amount of pollution your vehicle produces.  Your vehicle's manufacturer recommends how frequently those systems need servicing.  Keep those systems in good shape and you're likely to pass emissions tests with flying colors.  Neglect them and you might find your vehicle failing an emissions test.  When that happens, you'll have to get the problems repaired before you can get back on the road.

Kingwood Service Center
3318 Northpark Dr
Kingwood, TX 77339
(281) 360-7323
http://www.kingwoodservicecenter.net

How to Get Better Gas Mileage in Kingwood

There is no escaping it: things work better when you take care of them. Something most of us in Kingwood can relate to is our computers. You've probably noticed how they get slower and slower over time. It takes longer to start up and programs take forever to load. Eventually, many of us just get a new computer at our nearest Kingwood computer store. But computer experts know that there are things you can do to delay the need for a new computer purchase. You can run utilities that clean off temporary files and clean your memory registry. You can optimize your hard drive and a number of other things.

What you're doing is maintaining your computer to make it efficient. It's the same thing with your vehicle. You maintain it to make it more efficient. It works the way it was designed to and that means it uses less fuel while you drive around Kingwood. And you save money.

To help organize our discussion, let's think of things that rob us of fuel economy in two ways: increased friction and inefficient fuel combustion.

Friction. Anything that increases friction increases drag or load on the vehicle engine. It has to work harder to overcome the drag – and that takes more fuel. The first thing that comes to mind is engine oil. Low oil means there's not enough to fully lubricate the engine so there's more friction. Dirty oil won't lubricate as well as clean oil. The same principles apply to transmission fluid. Getting your oil changed and transmission serviced on schedule at Kingwood Service Center will reduce friction and help you get better fuel economy.

Another friction related problem is underinflated tires. When your vehicle tires are low on air, it's like driving on TX highways through sand – your vehicle has to work harder to move every mile. Check your tire pressure at least once a month.

Wheels out of alignment and dragging brakes also increase friction. And your tires and brake pads will wear out much sooner as well. At Kingwood Service Center, we provide quality brake and wheel alignment services.

Let's move on to Fuel. You have to get the right amount of clean fuel to the combustion chamber at precisely the right time. A dirty fuel system has varnish and gum interfering, and the fuel injectors may be unable to deliver the correct amount of fuel at the right pressure — and in the spray pattern — that the engineers intended. A vehicle fuel system cleaning at Kingwood Service Center will get all of that working right and really improve fuel economy.

Replacing your fuel filter on schedule will help keep your fuel clean. Replacing a sticky PCV valve will allow unburned fuel from the engine to be returned to the intake system to be used. Replacing worn spark plugs will burn your fuel as efficiently as possible.

All of these things can help you save money on gas at Kingwood pumps.

Give us a call.

Kingwood Service Center
3318 Northpark Dr
Kingwood, TX 77339
(281) 360-7323
http://www.kingwoodservicecenter.net

More than Pads and Rotors (Brake Caliper Replacement)

You might be familiar with brake pads and rotors, two components of your vehicle's brakes that have to be regularly serviced.  Here's another important component of your brakes: the calipers.

Calipers are used in disc brakes, the type of brakes now found in most recently manufactured vehicles.  A caliper is the part of the brakes that squeezes the brake pads against the discs, or rotors, which turn with your wheels. 

There are different kinds of calipers, but the basic principle is the same.  You press down the pedal, brake fluid activates a piston or pistons that squeeze the brake pads against the disc and the friction slows down your vehicle.

While modern vehicles have a warning system to let you know it's time to get your brakes checked, your brake light usually goes on when your fluid level is low or your fluid pressure is low.  But you may have to look out for signals your calipers are the problem. 

If your vehicle pulls to one side when you brake, that could be a sign that one caliper isn't working right.  If you smell a burning odor coming from a wheel after a trip, there might be too much pressure from a caliper.  Grinding or squealing when you brake is another signal that it may be time to bring in your vehicle so we can check your brakes.

One way to minimize brake issues is regular inspection.  Have them periodically looked at when you bring in your vehicle for an oil change.  The good news is brake issues are more likely to be caused by pads or rotors wearing out.  Calipers last a lot longer, but even they will need replacing every so often.  

Kingwood Service Center
3318 Northpark Dr
Kingwood, TX 77339
(281) 360-7323
http://www.kingwoodservicecenter.net

The Edible Engine

You may have had a friend whose vehicle was the victim of hungry rodents.  After all, mice, rats and squirrels—even rabbits—have been known to gnaw on wires in engine compartments, causing vehicle electrical systems to go haywire.  They can disable a vehicle completely and be very expensive to fix.

In 2017, some drivers noticed their vehicle's wiring was being chewed and found out the automaker was using a relatively new material for covering their wires: soy.  Many of the repairs to their new vehicles weren't covered under warranty by the manufacturer when it was discovered rodents were eating the wiring.  So the owners filed a class action suit, saying the soy covering was essentially baiting the critters. 

The automakers tell a different story, saying mice, rats and squirrels have been chewing through wire insulation long before it was made out of soy. 

Regardless of what the insulation is made of, vehicle owners should make sure rodents aren't chowing down and creating a problem in the engine compartment.  They can have their repair facility check for these signs:  Little bits of acorns, leaves, chewed up plastic and animal droppings in the engine's nooks and crannies.  Using a black light, your technician can detect animal urine, a sure sign that they've been using your engine compartment as a warm apartment, a nest and a dining room. 

You can take steps to prevent rodents from chomping your vehicle's parts.  Honda—one of the vehicle manufacturers that uses soy-based wiring covering—makes a rodent tape.  It contains a spice called capsaicin that rodents find too hot to handle.  Other preventative measures include installing metal mesh around wiring harnesses or spraying the engine compartment with special rodent-repellants. 

Rodent damage can cost one vehicle owner thousands of dollars to fix, not the kind of bite anyone wants taken out of their bank account.